URBAN - URBAN WB
Instruction Manual
48
Go to the Setup Webpage > ‘Integrations’ tab
Charge Point supports dierent versions of OCPP but only one can be enabled
at the same time.
Go back to setup web page and click on the ‘Integrations’ tab, choose the
option selected under ‘Available integrations’ according to your backend
policies as shown in the picture:
NOTE: Charge Point is working as stand-alone if ‘none’ option is selected.
All ID cards are authorized to start/stop a new charge transaction and no
requests are sent to the backend.
License required, refer to the next chapter for more information
about the activation.
To Next Page
Loading...
