Circutor URBAN - OCPP 1.5 Before Starting

URBAN - URBAN WB
Instruction Manual
35
OCPP 1.5
Before starting
B
Go to the Setup Webpage > ‘Network’ tab
Public Address Manager establishes where the Charge Point must obtain the
public IP address in order to send it later to the backend. Dierent values can
be selected in the ‘Address Type’ section:
Check following steps in order to ensure the correct function of OCPP 1.5:
Choose the option selected under ‘Address Type’ according to your network
topology.
When done, please do not forget to save changes using ‘Save’ button in the
upper right bar: