Circutor URBAN - Network Parameter Explanations

URBAN - URBAN WB
Instruction Manual
24
Parameter Description
Hostname Name of the Charge Point on the network
Address Type
•Local address: select this option if the OCPP central system is
connected to the same private network than the Charge Point is
already connected. It is assigned to the Ethernet Port.
•Static address: select this option if the external modem/rout-
er is dierent than listed below. It must have static public IP
address, check it with your SIM provider.
NOTE: Public IP address must be entered manually in the
“Public IP” text box.
•SIERRA Wireless Raven XE H2295EW: select this option
only when SIERRA Wireless RAVEN XE cellular router is con-
nected to the charge point.
•SIERRA Wireless AirLink LS300: select this option only
when SIERRA Wireless AirLink LS300 cellular router is connect-
ed to the charge point.
•Embedded modem: Select this option only when the modem
is integrated into the charge point control board.
•Teltonika RUT240 LTE: Select this option only when Teltonika
RUT240 LTE cellular router is connected to the charge point.
DHCP Client ID Client ID associated to the DHCP server (if available)
Public IP Static public IP address to write if provided by the SIM provider
IP Address IP Address assigned to the Charge Point
Netmask Netmask of the network
Gateway Gateway of the network