URBAN - URBAN WB
Instruction Manual
60
8
The IP address assigned previously, is useful to connect with the Charge Point
in order to monitor the real-time status.
The main way to connect is using the PowerStudio client software (Supplied
by CIRCUTOR) or you can download it from CIRCUTOR Webpage.
NOTE: Java software needs to be installed on your computer in order to
run the client software, please, download last version from: www.java.com
In remote connections, where is required communicate via 3G/4G
data with the Charge point in order to monitor its parameters, it
should be noted that there will be a HIGH consumption of data.
SCADA Client
To Next Page
Loading...
