4-8 P/N 21399-004
Section 4 Cirrus Design
Normal Procedures SR20
11. Left Main Gear and Forward Wing
a. Wheel fairings....................... Security, Accumulation of Debris
b. Tire.............................................Condition, Inflation, and Wear
• Caution •
Serials 2016 thru 2240 before SB2X-32-21: Clean and inspect
temperature indicator installed to piston housing. If indicator
center is black, the brake assembly has been overheated. The
brake linings must be inspected and O-rings replaced.
c. Wheel and Brakes ....... Fluid Leaks, Evidence of Overheating,
General Condition, and Security.
d. Chocks and Tiedown Ropes....................................... Remove
e. Fuel Drains (2 underside) ............................ Drain and Sample
f. Fuel Cap .......................................Check Quantity and Secure
g. Leading Edge and Stall Strips....................................Condition
12. Left Wing Tip
a. Fuel Vent (underside) ......................................... Unobstructed
b. Pitot Mast (underside) ................ Cover Removed, Tube Clear
c. Strobe, Nav Light and Lens ..................Condition and Security
d. Tip ..........................................................................Attachment
13. Left Wing Trailing Edge
a. Flap And Rub Strips (If installed) ..........Condition and Security
b. Aileron ..................................................Freedom of movement
c. Hinges, actuation arm, bolts, and cotter pins ............... Secure
Revision A1
To Next Page
Loading...
