Cisco MERAKI MS390 Series User Manual

MS390 Series Installation Guide
About this Guide
This guide provides instruction on how to install and configure your MS390 series switch. This guide also provides mounting instructions and limited
troubleshooting procedures. For more switch installation guides, refer to the switch installation guides section on our documentation website.
Product Overview
Models
Model number Description
MS390-24-HW
Stackable Layer-3 24-port Gbe switch with 10G/40G modular uplinks, hot-swappable power
supplies and hot-swappable fans
MS390-24P-HW
Stackable Layer-3 24-port Gbe POE+ switch with 10G/40G modular uplinks, hot-swappable power
supplies and hot-swappable fans
MS390-24U-HW
Stackable Layer-3 24-port Gbe UPOE switch with 10G/40G modular uplinks, hot-swappable power
supplies and hot-swappable fans
MS390-24UX-HW
Stackable Layer-3 24-port mGbe UPOE switch with 10G/40G modular uplinks, hot-swappable
power supplies and hot-swappable fans
MS390-48-HW
Stackable Layer-3 48-port Gbe switch with 10G/40G modular uplinks, hot-swappable power
supplies and hot-swappable fans
MS390-48P-HW
Stackable Layer-3 48-port Gbe POE+ switch with 10G/40G modular uplinks, hot-swappable power
supplies and hot-swappable fans
MS390-48U-HW
Stackable Layer-3 48-port Gbe UPOE switch with 10G/40G modular uplinks, hot-swappable power
supplies and hot-swappable fans
MS390-48UX-HW
Stackable Layer-3 36-port 2.5Gbe and 12-port mGbe UPOE switch with 10G/40G modular uplinks,
hot-swappable power supplies and hot-swappable fans
1

Cisco MERAKI MS390 Series Specifications

General

Model	MS390 Series
Product Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
Management	Cloud-managed
Uplink Ports	4 x 10G SFP+
Series	MERAKI
Ports	10/100/1000BASE-T Ethernet
Power over Ethernet (PoE)	PoE+
Layer 3 Features	Static routing
Cloud Management	Yes, via Meraki Dashboard
Stacking	Yes
Security Features	802.1X, DHCP snooping, ARP inspection
Operating Temperature	32°F to 104°F (0°C to 40°C)
Power Supply	Internal

Summary

Front Panel Components

Restore Button Functionality

The restore button clears switch IP and local configuration settings.

Power LED Status Interpretation

Indicates switch operational status: amber for issues, cycling colors for initialization, white for connection.

Switch Port LED Indicators

Back Panel Components

Factory Reset Procedure

Safety and Warnings

Upstream VLAN Configuration Check

STP Configuration Details

Device Reboot and Reset Precautions

Installation Instructions Summary

Stack Cabling Installation Guide

StackPower Cabling Installation Guide

Basic Troubleshooting Steps