Section 1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
PN: 1725-36192-001_H 19
8. Under the QoS tab, set Quality of Service to Platinum. This is the
required setting for voice traffic.
9. Set WMM Policy to Disabled (Note: This is required for usage with
SpectraLink Wireless Telephones using SVP for QoS).
Under the Advanced tab, uncheck the Client Load Balancing & Client
Band Select boxes.
10. Under the Security tab. At Layer 2 Security select the desired security
policy from the drop-down list.
a. For WPA2-PSK, under WPA+WPA2 Parameters:
i. Select the WPA2-Policy check box.
ii. Select the AES check box for WPA2-Encryption.
iii. At Auth Key Mgmt select PSK from the drop-down list.
To Next Page
Loading...
