Cisco 1230AG - Aironet - Wireless Access Point - Page 20

VIEW Certified Configuration Guide
PN: 1725-36192-001_H
20
b. For WPA-PSK, under WPA+WPA2 Parameters:
i. Select the WPA-Policy check box.
ii. Select the TKIP check box for WPA Encryption.
iii. At Auth Key Mgmt select PSK from the drop-down list.
The PSK Format may be selected as ASCII or HEX for both
WPA-PSK and WPA2-PSK policies.
c. For WPA2-Enterprise (802.1X), under WPA+WPA2 Parameters:
i. Select the WPA2 Policy check box.
ii. Select the AES check box for WPA2 Encryption.
iii. At Auth Key Mgmt, select 802.1X+CCKM from the drop-
down list.
11. Under the Advanced tab
a Set the DTIM to 2 for the radio that corresponds to the
SpectraLink Wireless Telephone configuration.
b Ensure the Enable Session Timeout box is unchecked.
c Uncheck the Client Load Balancing and Client Band Select
boxes.