Cisco 1240AG Series - Page 10

10
OL-16714-01
• One mounting plate
– Cable security bracket
– Two suspended ceiling T-rail clips (accommodates standard and
recessed T-rails)
– One security hasp
– Four 6 x 32 x ½ in. pan head Phillips machine screws
– One 8 x 18 x ¾ in. pan head Phillips sheet metal screws
– 2 #8 plastic wall anchors
– One 10 x 24 nut (for ground stud on mounting bracket)
– Four rubber foot pads
– Two cable tie wraps
• Quick Start Guide: Cisco Aironet 1240AG Series Access Point
• Safety Warnings for Cisco Aironet 1240AG Series Access Points
• Cisco product registration and Cisco documentation feedback cards
The following illustrations show the access point with its external antennas
connected.