44
OL-16714-01
For more details on these LED status codes, see the “Troubleshooting”
chapter of the Cisco Aironet 1240AG Series Access Point Hardware
Installation Guide.
Checking Basic Settings
Mismatched basic settings are the most common causes of lost connectivity
with wireless clients. If the access point does not communicate with client
devices, check the following areas.
SSID
Wireless clients attempting to associate with the access point must use the
same SSID as the access point. If a client device SSID does not match the
SSID of an access point in radio range, the client device will not associate.
Amber Various Various Cisco IOS errors
Blinking red Various Various Boot loader errors
Status LED Ethernet LED Radio LED Meaning
To Next Page
Loading...
