35
Quick Start Guide Cisco Aironet 1240AG Series Access Point
5. Click Apply.
6. Click Radio1-802.11A. The 5-GHz radio status page appears.
7. Repeat Steps 3 to 5.
8. Close your web browser.
Configuring Security Settings
After you assign basic settings to your access point, you must configure
security settings to prevent unauthorized access to your network. Because it
is a radio device, the access point can communicate beyond the physical
boundaries of your work site.
Just as you use the Express Setup page to assign basic settings, you can use
the Express Security page to create unique SSIDs and assign one of four
security types to them. For detailed security information, refer to the Cisco
IOS Software Configuration Guide for Cisco Aironet Access Points.
Configuring Basic Security Settings
You can use the Express Security page to create unique SSIDs and assign one
of four security types to them. This illustration shows the Express Security
page.
To Next Page
Loading...
