16
OL-16714-01
Warning
This product must be connected to a Power over Ethernet (PoE)
IEEE 802.3af compliant power source or an IEC60950 compliant
limited power source.
Statement 353
The access point power options:
• Option 1—Switches with sufficient inline power:
–
An inline power capable switch, such as the Catalyst 3550 PWR
XL, 3560-48PS, 3750-48PS, 4500 with 802.3af Power over
Ethernet module, or the 6500 with 802.3af Power over Ethernet
module
–
Other inline power switches supporting the IEEE 802.af inline
power standard
• Option 2—Switches without sufficient inline power can use the power
injector:
–
Cisco Aironet Power Injector (AIR-PWRINJ3 or
AIR-PWRINJ-FIB)
• Option 3—Local power using a power module
To Next Page
Loading...
