Cisco 1240AG Series - Page 23

23
Quick Start Guide Cisco Aironet 1240AG Series Access Point
5. Set the power settings and power injector fields, and verify your switch
status as shown in the power settings table.
Note To verify switch status, you need to use the switch CLI. See the
Cisco IOS software configuration guide for your switch.
.
Power Source System Power Settings Switch Status
Cisco PSE
supporting Cisco
Intelligent Power
Management feature
1
Power Settings: Power
Negotiation selected
Power Injector: Unchecked
power inline
auto
Cisco PSE not
supporting Cisco
Intelligent Power
Management feature
1
Power Settings: Prestandard
Compatibility selected
Power Injector: Unchecked
power inline
auto