32
OL-16714-01
–
Range—Maximizes the access point range but might reduce
throughput.
–
Default—The access point uses its default data rate settings for the
radio selected.
–
Custom—The access point uses settings that you enter on the radio
settings page. Clicking Custom takes you to the radio settings page.
• Aironet Extensions—By default, the access point uses Cisco Aironet
802.11 extensions to detect the capabilities of Cisco Aironet client
devices and to support features that require specific interaction between
the access point and associated client devices. Aironet extensions must
be enabled to support features such as load balancing, Message Integrity
Check (MIC), Temporal Key Integrity Check (TKIP), Repeater Mode,
and World Mode. Disabling Aironet Extensions disables the features
mentioned above, but it sometimes improves the ability of non-Cisco
client devices to associate to the access point.
To Next Page
Loading...
