Cisco 2500 Series Configuration Guide

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
721-1001-000-AH.docx
December 2016 13
Note: The WLC will provision the APs
It is not necessary to configure each AP individually. The WLC is capable of provisioning
the APs.
11 From the main menu, click Controller.
12 Set the AP Multicast Mode to Multicast and enter a multicast IP address that is currently
not being used on your network for the Multicast Group Address.
13 Click the Apply button.
Cisco 7.0:

Cisco 2500 Series Specifications

General

Brand	Cisco
Model	2500 Series
Category	Controller
Language	English