Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
721-1001-000-AH.docx
December 2016 21
Other versions:
Configuration for use with 2.4 GHz radio
1 From the main (Advanced) menu, click Wireless.
2 In the navigation pane, under Access Points click Radios, then select 802.11b/g/n. All
the APs that are connected should be listed, showing their Operational Status as UP.
3 Select Configure from the drop-down list for the access point you wish to change. Set
the parameters for that AP:
To Next Page
Loading...
