Cisco 3000 Series User Manual

0F TABLES
Table 1-1
System Specifications
1-3
Table 1-2
Network Interface
Options
1-4
Table 1-3
Memory Configurations
1-4
Table 2-1 RS-232
Speed
and Distance Limitations 2-10
Table 5-1 Network Interface
Options
5-5
Table 5-2
Approved
MB 80-Nanosecond DRAM SIMMs 5-12
Table 5-3
Approved
MB
36
80-Nanosecond DRAM SIMMs 72 5-12
Table 5-4
Approved 4-MB
120-Nanosecond Flash SIMMs 5-15
Table A-i Console Port RS-232 Pinouts and
Signals 25-Pin Connector
A-2
Table A-2
Auxiliary
Port RS-232 Pinouts and
Signals 25-Pin Connector
A-2
Table A-3 RS-232 DTE Serial Cable Pinouts
Descriptions
A-3
Table A-4 RS-232 DCE Serial Cable Pinouts and
Signal Descriptions
A-4
Table A-5 RS-449 DTE Serial Cable Pinouts and
Signal Descriptions
A-S
Table A-6 RS-449 DCE Serial Cable Pinouts and
Signal Descriptions
A-6
Table A-i V.35 DTE Serial Cable Pinouts and
Signal Descriptions
A-7
Table A-8 V.35 DCE Serial Cable Pinouts and
Signal Descriptions
A-8
Table A-9 X.21 DTE Serial Cable Pinouts and
Signal Descriptions
A-b
Table A-la X.21 DCE Serial Cable Pinouts and
Signal Descriptions
A-il
Table A-li EIA-530
DTE
Serial Cable
Pinouts and
Signal Descriptions
A-12
Table A-l2
Ethernet
AUI
Pinouts and
Signal Descriptions
A-13
Table
B-i
Virtual
Configuration
Bit
Meanings
B-2
Table
B-2
Explanation
of
Boot
Field
Configuration Register
Bits
0003
B-2
Table B-3 Default Boot
File
Names B-4
Table B-4
Configuration Register Settings
for Broadcast Address Destination B-S
Table B-S
System
Console
Terminal Baud Rate
Settings
B-S
Table C-i Command
Options
C-3
list of Tables ix

Cisco 3000 Series Specifications

General

Model	Cisco 3000 Series
Ports	Varies by model
Switching Capacity	Up to 176 Gbps
Power Supply	Internal or external, varies by model
Layer Support	Layer 2 and Layer 3
Power over Ethernet	PoE or PoE+
Memory	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 45°C (32° to 113°F)
Operating Humidity	10% to 85% non-condensing
Uplink Interfaces	Optional 1G/10G SFP/SFP+ or 10GBase-T