Cisco 3000 Series User Manual

Installation Checklist
Features of the router
power supply
follow
Autoselects either 110-volt
or
220-V
operation
All units include 6-foot
1.8-meter
electrical
power
cord label
near
the
power
cord
indicates the correct
voltage
and
current
draw for
your
unit
DnstaUaton Checkhst
The Installation Checklist
see Figure 2-1
lists the
procedures
for
initial hardware installation of
new
systems
Make
copy
of this checklist
and mark
your
entries as
each
procedure
is
completed
Include
copy
of the checklist for each
system
in
your
Site
Log See
the
Site
Log section
2-4 Cisco 3000 Hardware Installation and Maintenance

Cisco 3000 Series Specifications

General

Model	Cisco 3000 Series
Ports	Varies by model
Switching Capacity	Up to 176 Gbps
Power Supply	Internal or external, varies by model
Layer Support	Layer 2 and Layer 3
Power over Ethernet	PoE or PoE+
Memory	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 45°C (32° to 113°F)
Operating Humidity	10% to 85% non-condensing
Uplink Interfaces	Optional 1G/10G SFP/SFP+ or 10GBase-T