Cisco 3000 Series User Manual

Replacing
the Boot ROMs
5-17
Tools and
Equipment Required
for
Replacing
the Boot ROMs 5-17
Upgrading
the Boot ROMs
5-17
Replacing
the Chassis Cover
and
Tray
5-18
Recovering
Lost Password 5-18
Appendix Cabling Specifications
A-i
Assembling
Your Own Cables A-i
RS-232 Console and
Auxiliary
Port
Signals
and Pinouts A-2
Serial Cable Pinouts A-3
RS-232 Cable
Assembly
A-3
RS-449 Cable
Assembly
A-S
V.35
Cable
Assembly
A-7
X21 Cable
Assembly
A-b
EIA-530 Cable
Assembly
A-li
Ethernet Cable
Assembly
A- 13
Appendix
Virtual
Configuration
Register
B-i
Virtual
Configuration Register Settings
B-i
Changing Configuration Register Settings
B-2
Enabling Booting
From Flash B-S
Appendix
Bootstrap Program
C-i
Entering
the
Bootstrap Program
C-i
Available
Bootstrap
Commands C-2
Running
the
Diagnostics
C-4
Appendix Operating
Conditions for the United
Kingdom
D-i
For United
Kingdom
Use
Only
D-
Warnings
D-
Appendix
Operating
Conditions for the
European Community
E-1
For
European Community
Use
Only
E-
Index
Table of Contents

Cisco 3000 Series Specifications

General

Model	Cisco 3000 Series
Ports	Varies by model
Switching Capacity	Up to 176 Gbps
Power Supply	Internal or external, varies by model
Layer Support	Layer 2 and Layer 3
Power over Ethernet	PoE or PoE+
Memory	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 45°C (32° to 113°F)
Operating Humidity	10% to 85% non-condensing
Uplink Interfaces	Optional 1G/10G SFP/SFP+ or 10GBase-T