Cisco 3000 Series

APPENDIX
For United
Kingdom
Use
Ony
Cisco
Systems
declaration of
operating
conditions
The Cisco 3000 is
designed
to meet the
requirements
of NET1 and NET2
Warn
ngs
Operating
Condftionsforthe Unfted
Kingdom
Interconnection
directly or by
way
of other
apparatus
of
ports
marked
Safety
Warning
See instructions for use
with
ports
marked
or not so
marked
may produce
hazardous conditions on the network
and that
advice should be obtained from
competent engineer
before such connection is made
The
ports
marked
Ethernet lOBaseT Token
Ring Console
and AUX have
safety
warning applied
to
them
as follows
These
ports
do not
provide
isolation sufficient to
satisfy
the
requirement
of
BS6301 apparatus
connected to these
ports
should either have been
approved
to BS6301 or have
previously
been
evaluated
against
British Telecommunications
plc Post Office
Technical Guides or 26 and
given
permission
to
attach
any
that other
usage
will invalidate
any
approval given
to this
apparatus
Connection of Power
Supply
The
Gateway
Server is intended for use when
supplied
with
power
from
supply providing
220-240
VAC
50/60 Hz
up
to
Amps
Other
usage
will invalidate
any
approval given
to this
apparatus
if
as
result it ceases to
comply
with
BS6301 1989
The Cisco 3000 is
brought
into service
by
the
supplier
Operating
Conditions for the United
Kingdom
D-1