EasyManuals Logo

Cisco 3745 Installation Guide

Cisco 3745
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
1-9
Cisco 3700 Series Routers Hardware Installation Guide
OL-2180-08
Chapter 1 Overview of Cisco 3700 Series Routers
Power Supply Options
Power Supply Options
Table 1-3 lists the power supply options supported by Cisco 3700 series routers. Depending on the
configuration specified when you placed your order, your router may not support all of these options.
Internal –48 V Telephony Power Modules
Cisco 3700 series routers provide inline power to IP phones connected to the router through Ethernet
switch network modules. This power is supplied by special –48 V modules that connect directly to the
chassis power supplies in Cisco 3725 and Cisco 3745 routers. A single –48 V power module meets the
power needs of up to 36 IP phones. A Cisco 3745 router with two –48 V power modules installed
provides redundant power for up to 36 IP phones. Figure 1-5 and Figure 1-6 show the –48 -V power
modules as they appear when installed in Cisco 3700 series routers.
Table 1-3 Power Supply Options for Cisco 3700 Series Routers
Power Supply Option Cisco 3725 Cisco 3745
AC input power Yes Yes
DC input power Yes Yes
–48-V telephony power module to provide inline power to IP phones Yes Yes
Dual hot-swappable power supplies No Yes
1
1. Because of increased power consumption in high-temperature environments, a fully loaded Cisco 3745 router requires both
power supplies when ambient temperature exceeds 104˚F (40˚C). Cisco 3745 routers operating under these conditions do not
support the online replacement of power supplies.
Compatible with Cisco Redundant Power System Yes Yes

Other manuals for Cisco 3745

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3745 and is the answer not in the manual?

Cisco 3745 Specifications

General IconGeneral
Form FactorRack-mountable
Network Module Slots4
Advanced Integration Module Slots2
Product TypeRouter
Connectivity TechnologyWired
Data Transfer Rate100 Mbps
Data Link ProtocolEthernet, Fast Ethernet
Encryption AlgorithmDES, 3DES, AES
Authentication MethodRADIUS, TACACS+
Operating SystemCisco IOS
Power SupplyAC 120/230 V (50/60 Hz)
Operating Temperature32 to 104 °F (0 to 40 °C)
Storage Temperature-4 to 149 °F (-20 to 65 °C)
Interfaces10/100 Ethernet
RAM256 MB
Flash Memory128 MB (max)
Dimensions17.5 inches
Network / Transport ProtocolTCP/IP
Remote Management ProtocolSNMP, Telnet, HTTP
Humidity10% to 85% non-condensing
ProcessorMotorola PowerPC

Related product manuals