CHAPTER 3
Rack-Mount and Ground the Chassis
• Unpack and Inspect the Chassis, on page 47
• Rack-Mount the Chassis, on page 47
• Ground the Chassis, on page 52
Unpack and Inspect the Chassis
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately. Keep the shipping container in
case you need to send the chassis back due to damage.
Note
See Package Contents, on page 5 for a list of what shipped with the chassis.
Step 1 Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Rack-Mount the Chassis
This procedure describes how to install the Firepower 4100 in a rack using the rack kit that shipped with the
chassis.
Cisco Firepower 4112, 4115, 4125, and 4145 Hardware Installation Guide
47
To Next Page
Loading...
Need help?
General
