Chapter 12 Scenario: Site-to-Site VPN Configuration
Implementing the Site-to-Site Scenario
12-4
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
To configure the Security Appliance 1, perform the following steps:
Step 1 In the main ASDM window, choose the IPsec VPN Wizard from the Wizards
drop-down menu. ASDM opens the first VPN Wizard screen.
In Step 1 of the VPN Wizard, perform the following steps:
a. In the VPN Tunnel Type area, click the Site-to-Site radio button.
Note The Site-to-Site VPN option connects two IPsec security gateways,
which can include adaptive security appliances, VPN concentrators,
or other devices that support site-to-site IPsec connectivity.
b. From the VPN tunnel Interface drop-down list, choose Outside as the enabled
interface for the current VPN tunnel.
To Next Page
Loading...
Need help?
General
