12-13
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 12 Scenario: Site-to-Site VPN Configuration
What to Do Next
• debug crypto ipsec sa
• debug crypto isakmp sa
See also the Cisco ASA 5500 Series Command Reference for detailed information
about each of these commands.
What to Do Next
If you are deploying the adaptive security appliance only in a site-to-site VPN
environment, then you have completed the initial configuration. In addition, you
may want to consider performing some of the following steps.
You can configure the adaptive security appliance for more than one application.
The following sections provide configuration procedures for other common
applications of the adaptive security appliance.
To Do This... See...
Refine configuration and configure
optional and advanced features
Cisco ASA 5500 Series Configuration
Guide using the CLI
Learn about daily operations Cisco ASA 5500 Series Command
Reference
Cisco ASA 5500 Series System Log
Messages
To Do This... See...
Configure a remote-access VPN Chapter 9, “Scenario: IPsec
Remote-Access VPN Configuration”
Configure a clientless (browser-based)
SSL VPN
Chapter 11, “Scenario: SSL VPN
Clientless Connections”
Configure an SSL VPN for the Cisco
AnyConnect software client
Chapter 10, “Scenario: Configuring
Connections for a Cisco AnyConnect
VPN Client”
To Next Page
Loading...
Need help?
General
