Chapter 12 Scenario: Site-to-Site VPN Configuration
Implementing the Site-to-Site Scenario
12-6
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Step 3 Click Next to continue.
Configuring the IKE Policy
IKE is a negotiation protocol that includes an encryption method to protect data
and ensure privacy; it also provides authentication to ensure the identity of the
peers. In most cases, the ASDM default values are sufficient to establish secure
VPN tunnels between two peers.
In Step 3 of the VPN Wizard, perform the following steps:
Step 1 Click the Encryption (DES/3DES/AES), authentication algorithms (MD5/SHA),
and the Diffie-Hellman group (1/2/5) used by the adaptive security appliance
during an IKE security association.
To Next Page
Loading...
Need help?
General
