Chapter 14 Configuring the CSC SSM
Scenario: Security Appliance with CSC SSM Deployed for Content Security
14-12
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Step 8 In Step 4 of the CSC Setup Wizard, enter the following information:
• IP address and network mask for each subnet and host that should have
management access to the CSC SSM. By default, all networks have
management access to the CSC SSM.
Note For security purposes, we recommend that you restrict access to
specific subnets or management hosts.
• To enter a new host and network combination of settings, click Add.
• To remove an existing host and network combination, choose one from the
Selected Hosts/Networks list, and click Delete.
Step 9 Click Next.
To Next Page
Loading...
Need help?
General
