Allows you to dial phone numbers.Keypad8
Toggles the microphone on or off.
When the microphone is muted, the
button lights red.
Mute button9
Controls the handset and
speakerphone volume (off hook)
and the ringer volume (on hook).
Volume button10
Auto dials your voice messaging
system.
Messages button11
Dials the last dialed number.Redial button12
Depending on the phone setup, the
feature button provides you with
access to Speed Dial, Call Forward
All, Pickup, Group Pickup and
Meet Me features. You can
configure up to nine items on the
feature button. To access these
features, press the feature button
followed by the number associated
with the feature. You must press
the feature button and the number
within five seconds of each other.
The number can only be a single
digit number from 1–9.
You can access the following
features either off hook or on hook:
• Call Forward All—Allows
you to forward a call.
• Pickup—Allows you to
pickup a call on the third party
phone.
• Group Pickup—Allows you
pick up a call within a group.
• Meet Me—Allows you setup
a conference.
Feature button13
Phone handset.Handset14
Paper Label
Cisco Unified IP Phone 6911 does not include an LCD display. Cisco provides a paper strip, which can be
used to enter name and contact numbers.
Cisco Unified IP Phone
7
Cisco Unified IP Phone
Paper Label