Cisco 7900 Series

43-13
Cisco Unified CallManager System Guide
OL-14153-01
Chapter 43 Cisco Unified IP Phones
Phone Button Templates
Standard 7912 SCCP The Standard 1912 SCCP template uses button 1 for line 1, buttons
2 through 5 for speed dial, button 6 for Hold, and button 7 for
Settings.
Standard 7912 SIP The Standard 7912 SIP template uses button 1 for line 1, buttons 2
through 5 for speed dial, button 6 for Hold, and button 7 for
Settings.
Standard 7911 SCCP The Standard 7911 SCCP template uses button 1 for line 1, makes
button 2 configurable as the Privacy softkey (default specifies
None), and assigns buttons 3 through 6 as speed dials. The user
accesses speed dials from the Directories menu or the Navigation
button on the phone.
Standard 7911 SIP The Standard 7911 SIP template uses button 1 for line 1, makes
button 2 configurable as the Privacy softkey (default specifies
None), and assigns buttons 3 through 6 as speed dials. The user
accesses speed dials from the Directories menu or the Navigation
button on the phone.
Standard 7910 The Standard 7910 template uses button 1 for message waiting,
button 2 for conference, button 3 for forwarding, buttons 4 and 5 for
speed dial, and button 6 for redial.
The Cisco Unified IP Phone 7910 includes fixed buttons for Line,
Hold, Transfer, and Settings.
Standard 7906 SCCP The Standard 7906 SCCP template uses button 1 for line 1, makes
button 2 configurable as the Privacy softkey (default specifies
None), and assigns buttons 3 through 6 as speed dials. The user
accesses speed dials from the Directories menu or the Navigation
button on the phone.
Standard 7906 SIP The Standard 7906 SIP template uses button 1 for line 1, makes
button 2 configurable as the Privacy softkey (default specifies
None), and assigns buttons 3 through 6 as speed dials. The user
accesses speed dials from the Directories menu or the Navigation
button on the phone.
Standard 7905 SCCP The Standard 7905 SCCP template uses button 1 for line 1, buttons
2 through 5 for speed dial, button 6 for Hold, and button 7 for
Settings.
Standard 7905 SIP The Standard 7905 SIP template uses button 1 for line 1, buttons 2
through 5 for speed dial, button 6 for Hold, and button 7 for
Settings.
Standard 7902 The Standard 7902 template uses button 1 for line 1, buttons 2
through 5 for speed dial, button 6 for Hold, and button 7 for
Settings.
Standard 7936 The Standard 7936 template, which is not configurable for the Cisco
Unified IP Conference Station 7936, uses button 1 for line 1.
Standard 7935 The Standard 7935 template, which is not configurable for the Cisco
IP Conference Station 7935, uses button 1 for line 1.
Table 43-2 Default Phone Button Templates Listed by Model (continued)
Phone Button Template Name Template Description