EasyManuals Logo

Cisco 7925G Accessory Guide

Cisco 7925G
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Procedure
Step 1
Put the cable (with loops at each end) around a post or cable that is used to lock your computer, and then put
the two loops at the ends of the cable in the C-ring.
Step 2
Insert the C-ring in the slot on the back of the phone.
Step 3
Using the combination lock, fasten the two ends of the C-ring together to secure the phone.
Carry Cases
Carry cases make it easy to keep the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G with
you and provide some protection for the phone. The following sections describe the available carry cases.
Holster Carry Cases
The holster carry case is a hard plastic case that holds the phone and has a clip on the back that rotates 180
degrees. Use the clip to secure the phone to a belt or pocket.
There are two holster cases available: Cisco Unified Wireless IP Phone 7925G Holster Case and Cisco Unified
Wireless IP Phone 7926G Holster Case.
The following figure shows the Cisco Unified Wireless IP Phone 7925G Holster Case. The Cisco Unified
Wireless IP Phone 7926G Holster Case is similar in appearance, but is shaped differently to accommodate
the bar code scanner of the Cisco Unified Wireless IP Phone 7926G.
Figure 4: Cisco Unified Wireless IP Phone 7925G Holster Carry Case
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide
6
Cisco Accessories
Carry Cases

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals