EasyManuals Logo

Cisco 7925G Accessory Guide

Cisco 7925G
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Leather Carry Cases
A leather carry case makes it easy to keep the phone with you and provide protection for the phone.
There are two leather cases available: Cisco Unified Wireless IP Phone 7925G Leather Carry Case and Cisco
Unified Wireless IP Phone 7926G Leather Carry Case.
Features of the leather carry case include:
A clear plastic window that allows you to view the screen and provides easy access to the keys and
buttons.
Openings for the microphone, headset port, and mini-USB port that allow you to use and charge the
phone without removing the leather carry case.
A removable belt clip on the back that rotates 360 degrees.
A security cord with a ring on one end that slides onto the D-ring on the back of the carry case. You can
fasten the other end of the cord to a belt loop to secure the phone.
After you insert the phone in the leather carry case, you may need to adjust the alignment so the microphone
(at bottom of phone) is not covered.
Note
The following figure shows the Cisco Unified Wireless IP Phone 7925G Leather Carry Case. The Cisco
Unified Wireless IP Phone 7926G Leather Carry Case is similar, but the bar code scanner of the Cisco Unified
Wireless IP Phone 7926G is accessible without removing the case.
Figure 5: Cisco Unified Wireless IP Phone 7925G Leather Carry Case with Phone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide
7
Cisco Accessories
Leather Carry Cases

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals