Cisco 7942G Manual

Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 Introduction
■
2 Requirements
■
2.1 Identifying phone model
■
2.2 Phone firmware
■
2.3 DHCP server
■
2.4 PBXware version
■
3 Installation
■
3.1 Power adapter
■
3.2 Reset to factory settings
■
4 Registering Phone
■
4.1 Manual Configuration
■
4.2 Auto Provisioning Configuration
■
Introduction
This "How to" is written as general guide on how to use Cisco 7942G with PBXware using SIP
7.1 Cisco 7942G firmware. It covers the most common tasks that are required to have your
Cisco 7942G working efficiently.

Cisco 7942G Specifications

General

Lines	2
Audio Codec Support	G.711, G.729a, G.729ab, G.722
Network Protocols	SIP, SCCP
Ethernet Ports	2 x 10/100
Power Options	PoE 802.3af, Optional Power Cube
Speakerphone	Yes
Headset Port	Yes
Weight	3.5 lbs