Unlock configuration:
1. Press the "settings" button.
2. Use the "navigation" button and navigate down to "Unlock Config".
3. Press the "Select" button.
4. Enter password (Default factory password is "cisco").
5. Press the "Accept" button to unlock configuration.
SIP Configuration
1. Use the "navigation" button and navigate up to "Network Configuration".
2. Press the "Select" button.
3. Navigate down to "TFTP server".
4. Press the "Select" button to edit TFTP value.
5. Enter details into TFTP value field.
6. Press accept button and reboot the Cisco 7942G.
- Conclusion: If everything is done as above described you should have successfully registered
your Cisco 7942G to PBXware. Dial *123 to verify registration.
- For further information, please contact the manufacturer or check their web site
www.cisco.com.
Retrieved from "http://wiki.bicomsystems.com/Cisco_7942G"
Disclaimers - About Bicom Systems Wiki
To Previous Page
Loading...
Need help?
General
