Cisco 809 - Page 56

Design SpecificationDescription
-40° to 140°F (-40° to 60°C) in a sealed NEMA
cabinet with no airflow
-40° to 158°F (-40° to 70°C) in a vented cabinet with
40 lfm of air
-40° to 167°F (-40° to 75°C) in a forced air enclosure
with 200 lfm of air
(type tested at +85C for 16 hours)
-500 to 5,000 feet. Derate max operating temperature
1.5°C per 1000 feet. 10,000 ft maximum
Operating Temperature and Altitude
–40 to158°F (–40 to 85°C)Non-Operating Temperature
4570 m (15,000 ft)Altitude
10% to 95% non-condensingHumidity
Environmental Tests
MIL-STD-810, EN50155, SAE-J1455
Vibration
Half Sine (operating)
Duration = <2 ms
Velocity = 2.11 m/s
Shock
Certifications
UL 60950-1, 2nd edition
CAN/CSA C22.2 No. 60950-1, 2ndedition
EN 60950-1, 2nd edition
CB to IEC 60950-1, 2nd edition with all group
differences and national deviations
EN50155 and IEC61850
NUP T2 shock testing, non-NEBS 3396
Standard Safety Certifications
EN55022/CISPR22, CFR 47 Part 15, ICES003,
VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-
386, EN61000-3-2, EN61000-3-3, and EN61000-6-1
EMC Emissions
EN55024/CISPR24, (EN61000-4-2, EN61000-4-3,
EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-11), and EN300-386
EMC Immunity
EN301 489-1, EN 301 489-7, and EN301 489-24Radio Immunity
EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR
Part 22, 47 CFR Part 24 and EN 301 908-13
Cellular Radio
Cisco 809 Industrial Integrated Services Router Hardware Installation Guide
44
Technical Specifications
Technical Specifications