Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
How to Configure Channelized SONET/SDH
HC-339
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
OL-26061-03
Restrictions
• SONET APS is not supported on the 1-Port Channelized OC-48/STM-16 SPA.
• The Cisco ASR 9000 Series Router supports multirouter APS only on the following SPAS:
–
1-Port Channelized OC-3/STM-1 SPA
–
2-Port Channelized OC-12c/DS0 SPA
SUMMARY STEPS
1. aps group number
2. channel 0 local sonet interface
or
channel 0 remote ip-address
3. channel 1 local sonet interface
or
channel 1 remote ip-address
4. signalling {sonet | sdh}
5. end
or
commit
6. show aps
7. show aps group [number]
To Next Page
Loading...
Need help?
General
