Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Configuration Examples for Channelized SONET
HC-355
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
OL-26061-03
sts 1
mode vt15-t1
root
controller t1 0/1/1/0/0/0
channel-group 0 timeslots 1
channel-group 1 timeslots 2-3
commit
Channelized Packet over SONET Configuration: Example
The following example shows Channelized Packet over SONET configuration.
configure
controller sonet 0/1/1/0
clock source internal
framing sonet
sts 1
mode pos scramble
width 3
root
interface POS 0/1/1/0
encapsulation hdlc
pos crc 32
mtu 4474
no shutdown
commit
show interfaces pos 0/1/1/0
SONET Clear Channel T3 Configuration: Example
The following example shows SONET clear channel configuration for T3:
configure
controller sonet 0/1/1/0
clock source internal
framing sonet
sts 1
mode t3
root
controller t3 0/1/1/0/0
mode serial
root
interface serial 0/1/1/0/0/0:0
encapsulation ppp
ip address 10.10.10.10 255.255.255.255
no shutdown
commit
show controllers sonet 0/1/1/0
Channelized SONET APS Multirouter Configuration: Example
The following example shows SONET APS multirouter configuration.
aps group 1
channel 0 local SONET 0/0/0/1
channel 1 remote 172.18.69.123
signalling sonet
commit
show aps
show aps group 3
To Next Page
Loading...
Need help?
General
