Cisco A9K-SIP-700 Configuring

Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Configuration Examples for Channelized SONET
HC-359
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
OL-26061-03
multilink
group 1
!
!
interface Serial0/1/2/0/1/1/1/3:0
encapsulation ppp
multilink
group 1
!
The following example shows SDH AU-4 configuration with E1 controller channel groups and serial
interfaces:
configure
controller SONET0/3/2/0
framing sdh
au 1
width 3
mode tug3
tug3 1
mode c12-e1
!
tug3 2
mode c12-e1
!
tug3 3
mode c12-e1
!
controller E1 0/3/2/0/1/1/1/1
framing crc4
channel-group 0
timeslots 1-4
!
controller E1 0/3/2/0/1/1/3/1
framing crc4
channel-group 0
timeslots 1-31
!
controller E1 0/3/2/0/1/1/1/2
framing crc4
channel-group 0
timeslots 1-31
!
controller E1 0/3/2/0/1/2/7/3
framing crc4
channel-group 0
timeslots 1-5
!
channel-group 1
timeslots 6-31
!
interface Serial0/3/2/0/1/1/1/1:0
encapsulation frame-relay IETF
frame-relay lmi-type ansi
frame-relay intf-type dce
!
interface Serial0/3/2/0/1/1/1/1:0.1 point-to-point
ipv4 address 192.168.200.2 255.255.255.252
ipv4 verify unicast source reachable-via rx
pvc 100
encap ietf
!
interface Serial0/3/2/0/1/1/3/1:0
encapsulation ppp
multilink

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English