Cisco AIR-AP1832I K9 Series User Manual

8
5 Ports and Connectors on the AP
The 1830 series access points have an LED indicator on the face of the unit, above the Cisco logo, as
shown in Figure 1. For information on the LED scheme, see the “Access Point Status LEDs” section
on page 21.
The ports and connections on the access point are shown in Figure 2.
Figure 1 Access Point LED Indicator Position
1
LED indicator position. For information on the LED scheme, see the “Access Point Status LEDs”
section on page 21.
354089
1

Cisco AIR-AP1832I K9 Series Specifications

General

Model Number	AIR-AP1832I-K9
Category	Wireless Access Point
Frequency Bands	2.4 GHz and 5 GHz
MIMO	3x3
Antenna Type	Internal
Form Factor	Ceiling mount, wall mount
Wi-Fi Standards	802.11a/b/g/n/ac
Ethernet Ports	2x 10/100/1000BASE-T Ethernet (RJ-45)
Power Options	802.3af/802.3at PoE, AC Adapter
USB Port	Yes, USB 2.0
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	10% to 90% non-condensing
Security	WPA, WPA2, 802.1X, AES, TKIP
Management	Cisco Prime Infrastructure