Need help?Do you have a question about the Cisco AIR-AP2802I-E-K9 and is the answer not in the manual?
General| Model | AIR-AP2802I-E-K9 |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Console Port | Yes |
| Antenna Type | Internal |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity Range Operating | 10% to 90% non-condensing |
| Security Features | WPA, WPA2, WPA3, 802.1X, AES, TKIP |
| Wi-Fi Standards | 802.11a/b/g/n/ac |
| MIMO | 4x4 |
| Ethernet Ports | 2 x 10/100/1000BASE-T (RJ-45) |
| Power Options | 802.3af/at Power over Ethernet (PoE) |
| Storage Temperature | -30°C to 70°C (-22°F to 158°F) |
| Humidity Range Storage | 10% to 95% non-condensing |
| Management Features | Cisco Prime Infrastructure |
| Mounting Type | Ceiling, Wall |
| Dimensions | 8.7 x 8.7 |
Provides critical warnings about potential hazards and safe operation.
Advises users to keep safety instructions for future reference.
Details the optional procedures to ensure successful installation and operation.
Lists standard mounting brackets, clips, and methods for securing the access point.
Explains how the AP can be powered using PoE or a power injector.
Describes AP discovery via CAPWAP and the deployment process onto the network.
Discusses common reasons for access points failing to join a controller.
Details how to configure DHCP Option 43 for controller IP address discovery.
Covers RF exposure compliance and general discussion on radio frequency exposure.
Details how the device meets FCC guidelines for radio wave exposure.
Details how the device meets Industry Canada guidelines for radio wave exposure.
To Next Page