Cisco AIR-AP2802I-E-K9 - Supported External Antennas

6
Supported External Antennas
Cisco also provides the following external antenna accessories:
• 5 ft Low Loss RF cable with RP-TNC and N-type Connectors (AIR-CAB005LL-R-N/=). You will
need four of these.
• 2 ft Smart Antenna Connector to RP-TNC Connectors (AIR-CAB002-DART-R=).
Part Number Description Gain
AIR-ANT2524DB-R/= Dipole Antenna, Black, with RP-TNC connectors. 2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524DG-R/= Dipole Antenna, Gray, with RP-TNC connectors. 2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524DW-R/= Dipole Antenna, White, with RP-TNC connectors. 2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2535SDW-R Low Profile Antenna, White, with RP-TNC
connectors.
3 dBi (2.4 GHz)
5 dBi (5 GHz)
AIR-ANT2566P4W-R= Directional Antenna, 4-port, with RP-TNC
connectors.
6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2524V4C-R= Ceiling Mount Omni Antenna, 4-port, with
RP-TNC connectors.
2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2544V4M-R= Wall Mount Omni Antenna, 4-port, with RP-TNC
connectors.
4 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2566D4M-R= 60 Degree Patch Antenna, 4-port, with RP-TNC
connectors.
1
1. For the USA, the UNII-1 channels can be used only indoors.
6 dBi (2.4 GHz)
6 dBi (5 GHz)