To Next PageTo Next Page
Need help?Do you have a question about the Cisco AIR-AP1572IC and is the answer not in the manual?
General| Model | AIR-AP1572IC |
|---|---|
| Product Type | Wireless Access Point |
| Form Factor | Outdoor |
| Wireless LAN Standard | 802.11ac |
| Wireless Protocol | 802.11a/b/g/n/ac |
| Maximum Data Transfer Rate | 1.3 Gbps |
| MIMO | 4x4 |
| Antenna | Integrated |
| Mounting | Pole, Wall |
| Ingress Protection | IP67 |
| Frequency Band | 2.4 GHz and 5 GHz |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5 to 95% (noncondensing) |
| Security Features | WPA2, 802.1X, AES, TKIP |
| Power over Ethernet | Yes (802.3af) |
| Operating Temperature | -40 to 55°C |
Explains the naming convention for access point models and lists supported regulatory domains.
Lists the key features of the 1570 series access points, including management and security.
Introduces the antenna options for the 1570 series access points.
Explains how radios connect to physical antenna ports and allowable configurations.
Discusses the 2.4 GHz and 5 GHz radios and their capabilities, including safety warnings.
Details the available power sources for the 1570 series access points and associated warnings.
Explains the Power-over-Cable (PoC) power supply for certain models and its interface.
Guides on how to unpack the access point and verify package contents.
Lists the tools and hardware required for installing the 1572 access point.
Presents critical safety warnings and instructions for safe installation practices.
Provides guidelines for ensuring proper operation and safe use of the access point.
Declares compliance with FCC standards for human exposure to RF electromagnetic energy.
Lists essential safety precautions to follow during installation and operation.
Offers basic guidelines for optimal performance and successful installation.
Emphasizes the importance of site surveys for determining optimal component use and performance.
Lists essential steps and checks to perform before starting the installation process.
Provides instructions for installing the access points, covering mounting methods.
Guides on installing supported external antennas for the 1572 access point.
Provides safety guidelines specifically for antenna installation, including electrical hazards.
Provides instructions for properly grounding the access point before connecting power.
Details the supported power sources and how to power the access point.
Outlines the steps for connecting the access point to a 1570 series power injector.
Directs users to relevant documents for configuring the access point and its features.
Provides steps to configure DHCP Option 43 for specific access point series using Cisco IOS.
Details configuring DHCP Option 43 for several access point series using Cisco IOS.
