Cisco AIR-AP1832I K9C Series User Manual

GETTING STARTED GUIDE
Cisco Aironet 1830 Series Access Points
First Published: January 5, 2016
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Cisco Aironet 1830 (AIR-
AP1832I-E-K9C) o cerca il tuo prodotto tra le migliori offerte di Wireless e Bluetooth

Cisco AIR-AP1832I K9C Series Specifications

General

Model	AIR-AP1832I-K9C
Category	Wireless Access Point
Wi-Fi Standards	802.11a/b/g/n/ac
Wi-Fi Generation	Wi-Fi 5
Wireless LAN Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Antenna Type	Internal
Number of Antennas	3
USB Ports	1x USB 2.0
Ethernet Ports	1x 10/100/1000BASE-T (RJ-45)
Power Options	PoE, Power Adapter
Form Factor	Ceiling mount
Maximum Data Rate	1.3 Gbps
Operating Temperature	0°C to 40°C
Storage Temperature	-30°C to 70°C (-22°F to 158°F)
Security Features	WPA, WPA2, 802.1X
MIMO	3x3 MIMO with three spatial streams
Data Transfer Rate	Up to 867 Mbps on 5 GHz, 300 Mbps on 2.4 GHz
Dimensions	200 x 200 x 45 mm

Summary

About this Guide

About the Access Point

Access Point Features

Safety Instructions

Unpacking the AP

Ports and Connectors on the AP

Preparing the AP for Installation

Installation Overview

Performing a Pre-Installation Configuration

Mounting and Grounding the Access Point

Powering the Access Point

Configuring and Deploying the Access Point

Deploying the Access Point on the Wireless Network

After you have mounted the access point, follow these steps to deploy it on the wireless network.

Checking the Access Point LEDs

Miscellaneous Usage and Configuration Guidelines

Using the Mode Button

Using the Mode button you can: Reset the AP to its default factory-shipped configuration, Clear the AP's internal storage.

Troubleshooting the Access Point to Cisco Controller Join Process

Configuring DHCP Option 43

Declarations of Conformity and Regulatory Information

Guidelines for Operating Cisco Aironet Access Points in Japan

Statement 371—Power Cable and AC Adapter

Industry Canada

Canadian Compliance Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC & Medical Directive 93/42/EEC

Declaration of Conformity for RF Exposure

Generic Discussion on RF Exposure

The Cisco products are designed to comply with national and international standards on Human Exposure to Radio Frequencies.

This Device Meets International Guidelines for Exposure to Radio Waves

The 1830 series device is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.

This Device Meets FCC Guidelines for Exposure to Radio Waves

This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves

Additional Information on RF Exposure

Administrative Rules for Cisco Aironet Access Points in Taiwan

Low-power Radio-frequency Devices Technical Specifications

Operation of Cisco Aironet Access Points in Brazil

Declaration of Conformity Statements

Obtaining Documentation and Submitting a Service Request