EasyManuals Logo

Cisco AIR-AP1832I K9C Series User Manual

Cisco AIR-AP1832I K9C Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Caution This product and all interconnected equipment must be installed indoors within the same
building, including the associated LAN connections as defined by Environment A of the
IEEE 802.3af/at Standard.
Note The access point is suitable for use in environmental air space in accordance with section
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the
Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power
injector in air handling spaces.
Note Use only with listed Information Technology Equipment (ITE) equipment. For more
information on ITE equipment, refer to article 645 of the latest National Electrical Code
(NEC).
4 Unpacking the AP
To unpack the access point, follow these steps:
Step 1 Unpack and remove the access point and the mounting accessories, from the shipping box.
Step 2 Return any packing material to the shipping container and save it for future use.
Step 3 Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
The access point
Mounting bracket (AIR-AP-BRACKET-1= or AIR-AP-BRACKET-2=, only if selected when
you ordered the access point)
T-RAIL clips and Channel Adapter (only if selected when you ordered the access point)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco AIR-AP1832I K9C Series and is the answer not in the manual?

Cisco AIR-AP1832I K9C Series Specifications

General IconGeneral
ModelAIR-AP1832I-K9C
CategoryWireless Access Point
Wi-Fi Standards802.11a/b/g/n/ac
Wi-Fi GenerationWi-Fi 5
Wireless LAN Standard802.11ac
Frequency Bands2.4 GHz, 5 GHz
Antenna TypeInternal
Number of Antennas3
USB Ports1x USB 2.0
Ethernet Ports1x 10/100/1000BASE-T (RJ-45)
Power OptionsPoE, Power Adapter
Form FactorCeiling mount
Maximum Data Rate1.3 Gbps
Operating Temperature0°C to 40°C
Storage Temperature-30°C to 70°C (-22°F to 158°F)
Security FeaturesWPA, WPA2, 802.1X
MIMO3x3 MIMO with three spatial streams
Data Transfer RateUp to 867 Mbps on 5 GHz, 300 Mbps on 2.4 GHz
Dimensions200 x 200 x 45 mm

Related product manuals