To Next PageTo Next Page
Need help?Do you have a question about the Cisco AIR-AP1572EAC and is the answer not in the manual?
General| Model | AIR-AP1572EAC |
|---|---|
| Product Type | Wireless Access Point |
| Form Factor | Outdoor |
| Frequency Band | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 1.3 Gbps |
| PoE Support | Yes |
| Antenna Connector | RP-TNC |
| Ingress Protection Rating | IP67 |
| Wireless LAN Standard | 802.11ac |
| PoE Standard | 802.3af/at |
| Operating Temperature | -40 to 60 °C |
| Mounting Type | Pole Mount |
| Antenna Gain | 6 dBi |
Introduces the Cisco Aironet 1570 Series Outdoor Access Point, its design for outdoor and mesh networks.
Details the various operational modes supported by the 1570 series access points, such as unified, mesh, and bridging.
Describes the internal dual-band antennas of the AIR-AP1572I model and their specifications.
Details the external antenna ports and compatibility for the AIR-AP1572E models.
Explains the power-over-cable (PoC) power supply option, its signal acceptance, and shunt/fuse interface.
Provides step-by-step instructions for safely opening the shipping container and removing the access point.
Details the FCC compliance statement regarding human exposure to RF electromagnetic energy.
Lists crucial safety precautions to be observed during installation and operation of the access point.
Outlines the essential preparatory steps and checks required before starting the installation process.
Lists critical safety precautions specifically for the installation of antennas, including electrical hazards.
Guides users on connecting the access point to power using supported power injectors like AIR-PWRINJ1500-2= and AIR-PWRINJ4=.
Lists essential guidelines for optimal use of access points, including Layer 3 CAPWAP and pre-deployment checks.
Presents the FCC Declaration of Conformity statement for the access point models, including compliance conditions.
