To Next PageTo Next PageHow to reset Cisco Wireless Access Point to factory defaults?
To reset your Cisco Wireless Access Point to its factory default settings, use the MODE button or the web-browser interface to reset the configuration.
What to do if I forgot the password for my Cisco AIR-AP1121G-E-K9 Wireless Access Point?
If you've forgotten the password for your Cisco Wireless Access Point and can't configure it, reset the configuration using the MODE button or the web-browser interface.
What to do if Cisco AIR-AP1121G-E-K9 Wireless Access Point is not communicating?
If your Cisco Wireless Access Point is not communicating, check the three LEDs on the top panel.
What to do if firmware fails on Cisco Wireless Access Point?
If the firmware on your Cisco Wireless Access Point fails or the firmware image is corrupt, which is indicated by three red LEDs, reload the complete access point image file using TFTP or the web interface.
Why are wireless clients unable to associate with Cisco AIR-AP1121G-E-K9 Wireless Access Point?
Wireless clients might be unable to associate with the Cisco Wireless Access Point due to a mismatch in the SSID between the client device and the access point. Ensure that the wireless clients are using the same SSID as the access point.
General| Brand | Cisco |
|---|---|
| Model | AIR-AP1121G-E-K9 |
| Category | Wireless Access Point |
| Language | English |
Describes the physical components and features of the access point, including ports and indicators.
Provides essential safety guidelines, warnings, and compliance statements for installation.
Explains how to connect power and network cables to the access point using various options.
Guides through initial basic configuration via web interface or CLI, including system name and SSID.
Explains security measures to protect the wireless network from unauthorized access.
Explains navigation and interaction with the management pages, including buttons and layout.
Provides instructions for connecting to the CLI via Telnet or Secure Shell (SSH).
Step-by-step guides for mounting on horizontal/vertical surfaces, suspended ceilings, and cubical partitions.
Explains how to interpret LEDs and check common settings for troubleshooting.
Provides methods to reset the access point to factory defaults or reload its firmware image.
