Daisy-chaining between Access Point Models
•
The Slave AP can be: 1530 / 1550 / 3700P.
•
PoE-Out is 802.11at (25.5w), 1532E / 3702P, and can be powered directly.
•
For PoE-Out, the 1572 power source must be AC / DC / or PoC.
Configuring a Daisy-Chain
There are a few key components to address when configuring a daisy-chaining deployment:
•
Only Mesh Access Points (MAPs) can operate as a daisy chained AP.
•
The uplink daisy-chained AP is considered the Master AP, and the connected AP is considered the Slave AP.
31
To Next Page
Loading...
