Cisco Aironet 1572EC - LED Flashing Sequences

Cisco Controller) >show ap config general <ap_name>
Then scroll down the Mesh preferred parent entry
Mesh preferred parent ........................... 00:24:13:0f:92:00
LED Flashing Sequences
The following AP1572 LED behavior notifies users of the status of the Access Point (AP).
MeaningColor
1, 2
LED
No power applied or LED off.BlackStatus
AP is operational.Steady green
Download or upgrade of Cisco IOS image
file in progress.
Blinking green
Mesh neighbor access point discovery in
progress.
Steady amber
Mesh authentication in progress.Blinking amber
CAPWAP discovery in progress.Blinking red / green / amber
Firmware failure. Contact your support
organization for assistance.
Steady red
All network ports down or LED off.BlackUplink
Uplink port is operational (cable, fiber
optic, or Ethernet).
Steady green
33