10
Figure 2 Base of the AP with the Ports and Connectors
Note A physical security kit AIR-SEC-50=, which is sold separately, includes RJ-45 block-out plugs
and two unlock keys using which you can restrict physical access to the Ethernet port.
Note All the three LAN ports support Auto-MDIX. The interface automatically detects the required
cable connection type (straight through or crossover) and configures the connection
appropriately.
1
Passive Pass-through port
It is an RJ-45 port, from the base of AP to the
back of the AP.
4
LAN port 2
2
LAN port 3
This port can only be used for Local
Management and not for RLAN connectivity
for wired clients.
5
PSE / LAN port 1
This port provides 802.3af Power Sourcing
Equipment (PSE) PoE-Out power on the
LAN 1 Ethernet interface, when powered by
802.3at power.
3
Location of the concealed Status LED
You can see the LED only when it lights up.
To Next Page
Loading...
