The Cisco AP 2800 does not support a local power supply; however the AP 3800 does have a new high
wattage supply that can be used in applications where a PoE source is unavailable.
Note
Figure 47: White power supply and cord
Figure 48: AIR-PWR-50 mechanicals - Spare part # AIR-PWR-50=
The following Mid-Span devices are not compatible with the AP 2800 AP 3800:Note
• Mid-Span Injectors–AIR-PWRINJ, AIR-PWRINJ2, AIR-PWRINJ3, AIR-PWRINJ4 and
AIR-PWRINJ5
• Local power supplies–AIR-PWR-A, AIR-PWR-B and AIR-PWR-C
Cisco Aironet Series 2800/3800 Access Point Deployment Guide
45
AP 2800 and AP 3800 Powering Options
To Next Page
Loading...
