Cisco ASR 9000 Series Configuration Manual

Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
Configuration Examples for Serial Interfaces
546
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
OL-26061-03
• IPHC on a Serial Interface with MLPPP/LFI and QoS Configuration: Example, page 547
IPHC Profile Configuration: Example
The following example shows how to configure an IPHC Profile:
config
iphc tcp connections 6000 location 0/2/1
iphc non-tcp connections 6000 location 0/2/1
iphc profile Profile_1 type iphc
tcp compression
tcp context absolute 255
non-tcp compression
non-tcp context absolute 255
rtp
refresh max-period 50
refresh max-time 10
refresh rtp
feedback disable
max-header 20
commit
IPHC on a Serial Interface Configuration: Examples
Example 1
The following example shows how to enable an IP header compression (IPHC) profile on a serial
interface by attaching the profile directly to the interface:
config
interface serial 0/1/0/1
encapsulation ppp
ipv4 iphc profile Profile_1
commit
Example 2
The following example shows how to enable an IP header compression (IPHC) profile on an interface
by specifying a QoS service policy that contains an IPHC profile:
config
interface serial 0/1/0/1:1
encapsulation ppp
ipv4 iphc profile Profile_2 mode service-policy
service-policy output ip_header_compression_policy_map
commit
IPHC on Multilink Configuration: Example
The following example shows how to configure an IP header compression (IPHC) on a multilink
interface:
config
interface multilink 0/4/3/0/4
ipv4 address 10.10.10.10
encapsulation ppp
ipv4 iphc profile Profile_1
commit
interface serial 0/1/0/1:1
encapsulation ppp

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English