Cisco ASR 9000 Series - Page 36

The details of the MLDP profiles are discussed in the Cisco ASR 9000 Series Aggregation Services Router
Multicast Configuration Guide
Summary of Supported MVPN Profiles
This tables summarizes the supported MVPN profiles:
Data-MDTBGP-ADOpaque-valueNameProfile
Number
PIM TLVs over
default MDT
N/AN/ARosen GRE0
PIM TLVs over
default MDT
N/AType 2 - Root
Address:VPN-ID:0-n
Rosen MLDP1
N/AN/ACisco proprietary -
Source- PE:RD:0
MS- PMSI (Partition)
MLDP MP2MP
2
PIM or BGP -AD
(knob controlled)
•
Intra-AS MI- PMSI
•
S- PMSI for
Data-MDT
N/ARosen GRE with BGP
-AD
3
BGP-AD
•
I- PMSI with
empty PTA
•
MS- PMSI for
partition mdt
•
S- PMSI for
data-mdt
•
S- PMSI cust
RP-discovery trees
Type 1 - Source-
PE:Global -ID
MS- PMSI (Partition)
MLDP MP2MP with
BGP -AD
4
BGP-AD
•
I- PMSI with
empty PTA
•
MS- PMSI for
partition mdt
•
S- PMSI for
data-mdt
•
S- PMSI cust
RP-discovery trees
Type 1 - Source-
PE:Global -ID
MS- PMSI (Partition)
MLDP P2MP with
BGP -AD
5
N/AN/ARD:S,GVRF Inband MLDP6
N/AN/AS,GGlobal Inband7
N/AN/AN/AGlobal P2MP TE8
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
36
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support